High quality transformer cooling fan FGDD470 China Manufacturer Details

There are two types of fans, axial and radial flow, named after the airflow direction during fan operation.

When an axial flow fan operates, it is called an axial flow fan because its blades cause air to flow in the same direction as the fan axis；

When a radial fan operates, the blades push the air to flow in a direction perpendicular to the axis (i.e., radial). Hence, it is called a radial fan.

Dry Type Transformer fan refers to the device used for transformer cooling. It is designed and produced in strict accordance with JB/T8971-1999 Crossflow Cooling Fans for Dry-type Transformers. The iron core of the motor stator and rotor is made of high-quality cold-rolled silicon steel sheet, Low noise bearing. The impeller adopts aluminum alloy surface electrophoresis treatment and then fine dynamic balance adjustment. The left and right end plates are made of stainless steel by stamping, and the air inlet plate, air outlet plate, and air guide plate are made of aluminum alloy profiles by buckle combination. The fan has a reasonable structure, beautiful appearance, large air volume, low noise, low temperature rise, long service life, stable operation, convenient installation, etc.

working principle

When the cooling fan is used for the dry-type transformer, it is placed on both sides of the lower part of the transformer coil to blow the cold air directly into the high and low-voltage cooling air ducts of the transformer coil, with a noticeable heat dissipation effect, which can ensure the regular operation of the transformer and extend its service life. (The functions such as fan startup and shutdown, transformer overtemperature alarm, and overtemperature trip are provided by the temperature control device).

Model description

For example, the fan model is GFDD470-120A, which means that the working voltage is single-phase 220V, the total length of the fan is 470mm, and the impeller diameter is 120mm. The top-blowing dry-type transformer with the motor installed on the right side uses the Cross Flow Cooling Fan.

Cooling mode

The cooling mode of a dry-type transformer is divided into   forced air cooling (AF)and natural air cooling (AN). In a natural air-cooled environment, transformers can operate continuously for a long time at a lower capacity. With forced air cooling, the transformer's output capacity can be increased by 50%. It applies to intermittent overload or emergency overload operations. Due to the significant increase of load loss and impedance voltage during overload, it is in a noneconomic operation state, so it should not be in a long-term continuous overload operation.

Our company is mainly engaged in the processing, manufacturing, and sales of Transformer Accessories, Buchholz Relay, Tap Changer, oil level gauges, Butterfly Valve, Moisture Absorber, Pressure Relief Valve, Cross Flow Cooling Fans, Bimetal Thermometer， Epoxy Resin Insulators, and other industrial accessories.