Oil Transformer Oil Level Gauge China Manufacturer Details

The oil level gauge is a very mature product of Tongrun photoelectron. The company deals in the R&D, manufacturing, and sales of medium, high, and low-voltage transformers and Transformer Accessories. The transformer accessories mainly include Buchholz Relay, Tap Changer, oil level gauge, Butterfly Valve, Moisture Absorber, pressure reducing valve, Cross Flow Cooling Fan, Bimetal Thermometer, Epoxy Resin Insulator, etc. New and old customers are welcome to purchase and customize.

The basic structure of oil level gauge

The Pointer Oil Level Gauge (from now on referred to as the oil level gauge) applies to the oil level display of the Oil Immersed Transformer oil conservator and on-load tap changer oil conservator as well as the alarm of the lowest and highest limit oil level.

The oil level gauge is mainly composed of the display part consisting of a pointer and dial, the alarm part composed of the magnet (or cam) and switch, and the transmission part composed of a reversing and variable speed gear set, swing rod, and float ball.

Operating principle of oil level gauge

When the oil level of the transformer oil conservator rises or falls, the float ball of the oil level gauge or the diaphragm of the oil conservator will float up and down, making the swing rod swing up and down, thus driving the transmission part to rotate. The magnet (or cam) of the alarm part and the pointer of the display part will rotate through the coupling magnetic steel, and the information will point to the corresponding position. When the oil level rises to the highest level or drops to the lowest level, The magnet is pulled in (or the cam is pulled out), and the corresponding reed switch (or microswitch) sends out an alarm signal.

Installation of oil-level juice

An oil-level gauge with a floating ball-shaped swing rod should be installed in the center of the end cover of the oil conservator, and the swing rod should swing radially. Other oil level gauges with floating ball-type swing rods should be installed at the lowest oil level in the oil conservator. The telescopic rod-type oil level gauge for the diaphragm oil conservator shall be installed at the highest oil level of the oil conservator. During the installation of the oil level gauge, it must be ensured that the movable space of the swing rod and the floating ball is not interfered with by any structure.